首页 | 学院概况 | 师资队伍 | 本科生教育 | 研究生教育 | 科学研究 | 交流合作 | 党建工作 | 学生天地 | 工会视窗 | 校友之声 | 院务公开 
首页
 学院动态 
 学术交流 
 教育教学 
 学生工作 
 热点聚焦 
首页>>学术交流>>正文
航空学院青年学术论坛第六十讲
2017-04-24 10:06  

报告人:南洋理工大学  黄为民教授

时间2017428日下午 2:30-4:00

地点:西北工业大学友谊校区航空楼A706

题目Programmed motion generation via the advanced shape memory technology

摘要The shape memory effect (SME) is meant for the recovery of a material back to its original shape, but only at the presence of a right stimulus, such as heat, light and chemical (e.g., water). The advanced shape memory technology aims to achieve the required motion generation/actuation of a particular application based on the SME of an existing shape memory material (SMM) or a customized one.

In this talk, the basic concept of advanced shape memory technology is briefly introduced, together with the major mechanisms to enable the SME in materials. After that, a series of examples will be presented to reveal the feasibility of utilizing the advanced shape memory technology to realized programmed motion generation in a fully autonomous manner in some typical applications, such as active assembly/dis-assembly, 4D printing, and occlusion of blood vessel. 

 

黄为民教授简介Prof Wei Min Huang obtained his PhD from Cambridge University, UK in 1998 and then joined the School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore. He has beenan Associate Professor (tenured) at this university since 2006.His research interest is on various shape memory materials and technologies. He has published over 180 journal papers and two books, (Thin film shape memory alloys: fundamentals and device applications, Cambridge University press, 2009) and  (Polyurethane shape memory polymers, CRC, 2011). He is currently on the editorial board of over a dozen of journals

 

关闭窗口
版权所有©西北工业大学航空学院 | http://hangkong.nwpu.edu.cn